Jump to content

AtomoSynth KOE Desktop Mini Modular v2.0

   0 reviews  -  1230 views

    The KOE Desktop Mini Modular v2.0 is based on the Koe synth voice Eurorack module and Ki midi to CV module and housed in a beautiful wooden case which includes power supply, three patch cables and audio cable.

    It has 2 VCO's with square and ramp wavefoms. There is depth and tune controls, each tune control is a ten turn potentiometer which allows you easily set octave, tune and fine tune with just one knob. The Oscillator section has two CV inputs: VCO1+2 which controls both oscillators and VCO2. When a plug is connected to the VCO2 input the VCO1+2 input controls oscillator 1 only. There is also a noise source with level knob and on/off switcher and features a noise output jack.

    There is 1 LFO with square and triangle waveforms, which has a switcher for setting it to control the VCO frequency or the Filter cut off. Additionally there is a cv input to for the LFO depth and an output jack. The unit has a High pass and Low pass vactrol based filter with cutoff and resonance/peak control and has an input jack to control the cut off frequency. There are 2 Envelope generators: EG1 with decay control which and depth control, it is set to control the cut off frequency of the filter and also features an output jack. EG2 with attack and release controls, set to control the volume.

    Additionally the Koe Desktop modular features a KI Midi to CV converter
    which specificatins offer: 12HP width, Power: +/- 12V, +5V . CV1 PITCH output 0 to +4.8Volt range (57 notes).It comes from a very accurate 12 bit resolution (4096 steps) digital to analog converter DAC, which translates the incoming midi note messages to voltage. It also responds to the pitch bend or pitch wheel control, according to the midi standard and has a range of +/- two half steps.

    Glide effect, it controls the CV1 PITCH output. The Gate output 0 or +5 Volt. it has a red LED that indicates when there is an active gate signal. CV2 output 0 to +5 Volt range, it comes from a 7 bit resolution (128 steps) digital to analog converter, it can be easily set to output the velocity or any controller CC from the midi device.

    The PROGRAM button allows you easily set the midi channel just by pushing it and then pushing a note in your midi keyboard, the midi channel will be automatically set and stored even when the unit is turn off. It also allows you to set the controller CC for the CV2 output, just push the Program button and move any controller in your midi device and it will be set automatically.

    The unit has Midi In and Midi Thru connectors, allowing you to connect many midi devices in chain. The faceplate is made with 3mm dark grey laser cut acrylic, the knobs are black aluminum.
    Type: Analog
    Synthesis: Subtractive
    Oscillators: 1
    Waveforms: Square, White Noise
    Osc Modulation: Envelope, Glide / Portamento, Knob, LFO
    Envelopes: 2
    Evelope Paramerters: Attack, Decay, Release
    Filters: 1
    Types: High Pass, Low Pass, Resonance
    Filter Modulation: Envelope, Knob, LFO
    LFO: 1
    LFO Parameters: Square, Triangle, Clocked
    Polyphony & Tuning
    Polyphony: 1
    Tuning: Standard
    Modes: Mono
    Patches RAM: 1
    Case: Desktop
    Keyboard: Wood
    Controls: Knobs, Switches, Modulation 1/8" Jacks, Pedal - Filter
    Audio Output Connections: 1/4" Phone Jack, Mono Out
    Audio Output Count: 1
    Inputs: 1 x 1/8" Input
    MIDI Ports: IN, THRU
    CV Ports: CV OUT, Gate Out
    Year Released: 2013
    Manuals & Documents

    Product Links
    Company Product Sites:
    [+] atomolabs.blogspot.com
    Used Price: $395 - convert
    YouTube Videos
    Related Synthesizers

User Feedback

Create an account or sign in to leave a review

You need to be a member in order to leave a review

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

There are no reviews to display.