Sign in to follow this  
Followers 0

Buchla 100 Series Modular Electronic Music System

   0 reviews  -  381 views
    Description
    The Modular Electronic Music System is composed of functional modules, each designed to generate a particular class of signals or perform a specific type of signal processing. Each module is 7 inches high and 4 1/4 inches (or an integral multiple thereof) wide. Up to 25 modules sharing a single power supply may be assembled in a single cabinet to form a super-module.

    The system employs three varieties of signals, each with a distinctly different function:

    Audio signals, the raw material of electronic music, are formed by various sorts of generators (sine, square, sawtooth, harmonic) or are produced externally (tape loop, radio, microphone). In composing a piece, signals may be filtered, gated, mixed, modulated, or otherwise processed. A standard level of 0 dB (ref. 600 Ohms) is employed for audio signals within the system.

    Control voltages, used to determine frequencies, envelope characteristics, amplitudes and other parameters, are generated by keyboards, programmable voltage sources and envelope generators. The standard control voltage range is from 0 to 15 volts.

    Timing pulses are originated by keyboards, programmable sequencers, and pulse generators. They are used to trigger notes, open gates, or initiate chains of musical events. Timing pulses are about 15 volts in amplitude.

    The rules for interconnecting are straight-forward. Any number of inputs may be connected to a single output. Timing pulse outputs may be paralleled and connected to one input. The system output may be derived from any module; output is of sufficient magnitude to drive line inputs on tape recorders or sensitive inputs on power amplifiers.

    Buchla 100 Modules

    101 Cabinet

    Specially designed two-part cabinet accommodates power supply and 25 panel units. (Most modules are 4 1/4" x 7" and occupy one panel unit, but some are 8 1/2", 17", or 21 1/4" wide and occupy two, four, or five panel units.) Over all dimensions are 24" wide x 24" deep x 31" high.

    102 Dual Stereo Locator

    Dual panning controls.

    106 Mixer

    Two 3-channel mixers with both separate and common outputs and level controls for each input.

    107 Voltage Controlled Mixer

    Two 5-channel mixers with both separate and common outputs. Input levels are controlled by externally applied control voltages usually derived from a model 114 touch controlled voltage source.

    110 Dual Voltage Controlled Gate

    Two voltage controlled amplifiers generally used in conjunction with a Model 180 attack generator to control the envelope of applied signals.

    111 Dual Ring Modulator

    Two independent ring modulators. Each output consists of the sums and differences between frequency components of two input signals. Original signals are suppressed about 55 dB.

    112 Touch-Controlled Voltage Source

    Touch activated keys produce one of sixteen preselected voltages at each of two outputs. A third output voltage is proportional to finger pressure, and a fourth output is a pulse generated whenever a key is activated. Generally used to initiate notes and control their pitches.

    113 Touch-Controlled Voltage Source

    A touch-sensitive keyboard consisting of four circles, each of which is divided into five segments (1 central and 4 peripheral). Touching a segment causes an increase in voltage at a corresponding output. Switch-selected time constants provide extended attack and decay times. 20 potentiometers control the output voltages independently of or in conjunction with the keyboard. Used with the Model 120 distributor, the Model 113 enables a performer to manipulate the origin of sounds within a room. Used with Model 310 lamp drivers, spatial control of room lighting may be realized.

    114 Touch-Controlled Voltage Source

    Ten independent, touch activated keys, each with a corresponding control voltage output and pulse output. The voltage outputs are particularly useful for controlling gates (110) or mixers (107), and the pulse outputs for initiating attach waveforms (180) or other events.

    115 Power Supply

    Powers a cabinetful of modules plus one or two keyboards. Installed in Model 101 cabinet, unit occupies no panel space.

    120 Distributor
    A cross mixer with four inputs and five outputs. Any input may be connected to any output by applying a voltage at the appropriate point in the control matrix. The Model 120 may be used in conjunction with the model 113 voltage source for directing the origin of sounds within a room.

    123 Sequential Voltage Source

    Produces a sequence of two to eight programmed voltages at each of three outputs. Switching is accomplished by applying a pulse, usually from a Model 140 pulse generator. Indicator lamps show which of the 24 potentiometers are in control. Eight pulse outputs are energized as corresponding segments are switched. Unit may be used to simultaneously program pitch, amplitude, and duration of single or repetitive sequences of notes.

    124 Patchboard

    Consists of 24 miniature audio jacks mounted on a panel. Used in studio installations to facilitate connection to tape recorders, monitors, and other auxiliary equipment.

    130 Dual Envelope Detector

    Produces a control voltage proportional to the instantaneous amplitude of an applied signal. Detector time constant is variable from .01 to 1 second.

    132 Waveform Synthesizer

    Used to generate complex, repetitive waveforms. The desired waveform is approximated by setting the instantaneous amplitude of each of 32 increments. Aural feedback, random knob-twiddling, and (desirably) and accessory oscilloscope contribute to achieving the desired sound. Frequency is continuously variable from 1 cps to 2 kc and may be controlled internally or with an externally applied voltage. The instrument may be frequency modulated and a synchronizing trigger is provided to facilitate oscilloscope monitoring.

    140 Timing Pulse Generator

    Produces repetitive pulses at intervals of .005 to 20 seconds. Period and duty cycle may be controlled internally or by applied control voltages.

    144 Dual Square Wave Oscillator

    Two independent oscillators in one unit. Frequencies are continuously variable from 5 cps to 20 kc and may be controlled internally or with externally applied voltages. There is provision for wide band amplitude and frequency modulation.

    146 Sequential Voltage Source

    Produces a sequence of two to sixteen programmed voltages at each of three outputs. Otherwise identical to Model 123.

    148 Harmonic Generator

    Generates a fundamental and its first nine harmonics (harmonic numbers 1 - 10). Fundamental frequency is continuously variable from 5 cps to 5 kc and may be controlled internally or with an externally applied voltage. There is provision for wideband frequency modulation. The 148 is frequently used in conjunction with mixers (106, 107), gates (110), and attack generators (180) to enable precise programmed envelope control of individual overtones.

    150 Frequency Counter

    Four digit counter measures frequencies to 100 kc with precision of 10 cps. Frequencies below 10 kc are measured with a precision of 1 cps.

    156 Dual Control Voltage Processor

    Serves to mix, compress and invert control voltages. Each channel has two control voltage inputs and an internal voltage source. Particularly useful for obtaining fine pitch control, transposition capability, and range compression of control voltage sources.

    158 Dual Sine-Sawtooth Oscillator

    Two independent oscillators in one unit. Frequencies are continuously variable from 5 cps to 20 kc and may be controlled internally or with externally applied control voltages. Waveshape is continuously adjustable from sine to sawtooth; oscillators may be wideband frequency modulated.

    160 White Noise Generator

    Produces white noise with a flat frequency distribution from 5 cps to 20 kc and weighted noise with a constant power per octave distribution.

    165 Dual Random Voltage Source

    Produces two uncorrelated, random output voltages, each of which is changed by applying a trigger pulse. Used to randomize frequency, amplitude, and time.

    170 Dual Microphone Preamplifier

    Two high-grain mike preamplifiers. Input connectors are 3 pin XLR. Input impedances are selected by a panel mounted switch.

    171 Dual Instrument Preamplifier

    Two preamplifiers for electric guitars, contact microphones, and other low-level signal sources. Input impedances are 200 k ohms; input connectors are standard phone.

    175 Dual Equalizer - Line Driver

    Used in studio installations to drive 600 Ohms headsets or unbalanced lines at a nominal +4 dB (max. +20 dB). Unit incorporates bass and treble control of the variable turnover variety.

    180 Dual Attack Generator

    Two independent units produce envelope control voltages initiated by pulses. Attack time is variable from .002 to 1 second; decay time from .002 to 5 seconds; duration from .002 to 5 seconds. Duration may be optionally controlled by trigger pulse length.

    185 Frequency Shifter

    Shifts frequencies contained in input signal by an amount equal to the applied carrier frequency. Raised and lowered signals are simultaneously available.

    190 Dual Reverberation Unit

    Two independent spring type reverberators. Degree of reverberation in continuously variable.

    191 Sharp Cutoff Filter

    Voltage controlled highpass and lowpass filters with 24 dB/octave slopes. Cutoff frequencies are variable for 5 cps to 20 kc with no range switching. Also functions as a bandpass filter with voltage controlled center frequency and bandwidth.

    192 Dual Lopass Filter

    Two lowpass filters with cutoff frequencies variable from 200 cps to 20 kc. Slopes have sharp knees and are 12 dB/octave.

    194 Bandpass Filter

    Divides an input signal into four frequency bands. Cross-over frequencies are 200 cps, 900 cps, and 4 kc. Slopes have sharp knees and are 12 dB/octave.

    195 Octave Format Filter

    Divides an input signal into ten frequency bands centered at octave intervals from 31 cps to 16 kc.

    196 Phase Shifter

    Shifts phase of input signal such that a 90 degrees (+/- 5 degrees) phase relationship between the two outputs is maintained from 5 cps to 20 kc. Used in conjunction with ring modulators for frequency shifting or for exotic visual displays.
    Images
    Architecture
    Type: Analog
    Synthesis: Additive, Frequency Modulation, Subtractive
    Oscillators
    Oscillators: *
    Waveforms: Sine, Square, White Noise
    Osc Modulation: Envelope, Keyboard, Knob, LFO, Oscillator, Ring Modulation
    Envelopes
    Envelopes: *
    Evelope Paramerters: Attack, Decay
    Filters
    Filters: *
    Types: Low Pass
    Filter Modulation: Envelope, Keyboard, Knob, LFO, Oscillator, Sequencer
    LFO
    LFO: *
    LFO Parameters: Sample & Hold, Saw Up, Square, Triangle
    Polyphony & Tuning
    Polyphony: 1
    Timbrality: 1
    Tuning: Atonal, Standard
    Modes: Duophonic, Mono
    Patches
    Patches RAM: None
    Sequencer
    10 and 16 Step Sequencers
    Case
    Case: Desktop, Rack
    Case Details: 10 and 16 key modules
    Keyboard: Touch Plates
    Controls: Buttons, Faders, Knobs, Modulation Banana Jacks, Mod - Ribbon, Sequencer, Sliders, Switches
    Display Type: LED, VU Meter
    Connections
    Audio Output Connections: 1/4" Phone Jack, 1/8" Phone Jack, Mono Out, Stereo Main
    CV Ports: CV IN, CV OUT, Gate In, Gate Out, Trigger In, Trigger Out, 1 Hz Octave
    Pricing
    List: Configuration Dependent
    Production
    Released: 1963
    Manuals & Documents
    Reviews

    Shopping


    Patch Sheet
    Advertisments
    YouTube Videos


Sign in to follow this  
Followers 0


User Feedback

Create an account or sign in to leave a review

You need to be a member in order to leave a review

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

There are no reviews to display.