Jump to content
Sign in to follow this  

Casio FZ-1 Digital Sampling Synthesizer Keyboard

   (0 reviews)

The FZ-1 was a 5-octave keyboard (61-keys from C to C) and hybrid sampler/synthesizer released by Casio Computer Company in 1987. Its original list price in the UK was just under £2000, making it one of the more affordable samplers on the market with features such as waveform drawing and 16-bit sampling resolution that were previously only available on more expensive equipment, such as the Fairlight CMI Series III of 1985.

The FZ-1, for the time, offered impressive sampling features: A 1 MB (10242 bytes) sampling memory (expandable to 2 MB), booting from ROM rather than an OS diskette, harmonic additive synthesis and digital subtractive synthesis in one complete package. Like the Fairlight CMI the FZ-1 used a GUI-driven menu system in which all functions were listed under specific menus and sub-menus. However, unlike the Fairlight, the FZ-1 did not use a stylus and qwerty keyboard for input. Instead, the FZ-1 used data sliders (like those present on the Yamaha DX range of synthesizers), 4-way cursor keys, an alphanumeric key-pad, plus "yes"/"no" buttons that also acted as a means of data increment or decrement. The FZ-1 was often criticised for its unintuitive interface, which at times could be tedious or confusing, due to the nature and sheer number of menus.

When sampling a sound into the FZ-1, the user could choose the sampling time (in 10ths of a millisecond) and the sampling frequency (either 9, 18 or 36 kHz). As the FZ-1 only came with a meagre (by today's standards) 1 MB of memory, the maximum length of a single sample, or the total length of multiple samples, was just under 15 seconds (with the sampling frequency set to 36 kHz). This is no doubt one of the reasons that the option to sample at lower frequencies was provided.

The additive synthesis section contained 48 harmonic levels, each with a level between 000 and 256 for a high degree of flexibility for organic sounds and ambient textures. The resulting waveform then had to be "executed" (saved) into the FZ-1's memory before it could be played via the keyboard or over MIDI. When altering the harmonics the user could view the waveform graphically, to get a better idea of how any alterations were affecting the output.

The waveform drawing section gave the user the ability to draw their own waveform cycles, a very uncommon feature at the time. The user specified a range from either -127 to +127 for each of the 96 points across the waveform cycle. Each point could be altered via a textual display or by drawing each point on the waveform via a graphical interface. The user could also hold down the left cursor button and move the data-entry slider to quickly "draw" a waveform, rather than entering in the values point-by-point.

The FZ-1 also came with pre-set waveforms typical of those from conventional analogue synthesizers, as well as digital waveforms taken from the Casio CZ synthesizers. The pre-set waves were: Random, Saw Pulse, Double Sine, Pulse, Square and Sawtooth. The FZ only permitted the use of one pre-set waveform per voice. In order to have more than one pre-set waveform in a single voice, the user could create two or more voices, each with a pre-set waveform, and then mix them together (applying detune at this point if desired). With this method it was possible to simulate a sound from a multiple oscillator synthesizer, or even create something as complex as a supersaw.

Once samples were saved in the FZ-1's memory, they could be truncated, mixed and detuned with another voice, "X-Mixed" (similar to cross modulation) and detuned with another voice and/or reversed. Each of these alterations could be made by text input or via a graphical display of the waveform. The same applied to synthesized voices, minus the truncating.

The FZ-1 (unlike Casio's other professional equipment) had a resonant low-pass filter. This filter was a hybrid design, with the same characteristics as an analogue filter and it was one of the FZ series' best features, allowing for dramatic, creative alteration of sounds, in a way not possible on any Akai (Casio's chief competitor) machine until the S3000. The FZ-1 also had an analog amplifier. The filtering and level control were carried out by four Casio MB87186 chips, each of which contain two filters and digitally controlled amplifiers. Some people assume the filters are purely digital, but this is not the case. Close examination of the schematic[citation needed] shows that the filtering is carried out after the digital to analogue conversion and demultiplexing[citation needed]. Both the filter and the amplifier used the same 8-stage envelopes of the Casio CZ synthesizers but had the ability to make sections of the envelope loop. The envelopes on the FZ-1 were also less cryptic to program than those on the CZ synthesizers, because the envelope shape could be adjusted on the LCD display, rather than by text entry alone.

Casio's older CZ synthesizers suffered from a lack of modulation as they only contained one LFO, used to modulate oscillator pitch. The FZ-1 greatly improved on this by allowing the single LFO to control oscillator pitch, amp level and filter level.

The FZ-1's keyboard was velocity sensitive, with monophonic aftertouch. This not only improved on Casio's older keyboards by allowing greater keyboard expression but it also allowed more modulation control – velocity sensitivity and aftertouch both had their own sub-menus where modulation settings could be applied to the filter, amp and oscillator pitch. The velocity sensitivity could also be used to trigger different samples layered on one key (e.g., playing the key lightly would play one sample, playing it harder would play another sample, and playing it as hard as possible would produce another and so on up to a maximum of 64 different samples and 125 velocity levels). This could be useful when recreating a drum kit or an instrument such as a piano.

The FZ-1 also had the ability to perform the functions of a multitimbral expander with 8 independent polyphonic voices played simultaneously over MIDI. Once again the FZ-1 improved upon the CZ synthesizers by having 8 separate audio outputs located on the back of the unit, allowing more control over the volume levels by the use of an external mixer. However, a voice was as polyphonic as the number of outputs it was assigned to. If assigned to one output, it was monophonic; if assigned to all eight outputs, it was 8-voice-polyphonic.

Casio also produced several rackmount expander versions of the FZ. These were the FZ-10M and FZ-20M. The expander units included a number of enhancements over the keyboard version: double the memory (2MB) as standard (allowing a maximum sampling time of 29 seconds at 36 kHz); significantly improved playback sound quality, through the use of a different DAC (Digital-to-analog converter); improved user interface, through a brighter display and the noticeably faster internal response to the use of buttons and sliders, plus a number of bug fixes.

Casio's FZ series offered considerable advantages over their main competition at the time, the Akai S900, but the Akai dominance of the market was much too great to overcome, plus Casio's efforts were hampered by the Casio name, for many buyers, not being synonymous with professional music products. In 1989 Akai launched the S1000 model, surpassing many of the capabilities of Casio's FZ machines (though not the FZ's resonant filter – a glaring omission on the S1000) and Casio had no answer. It seems Casio had already taken a decision to withdraw from the professional hi-tech musical instruments market.
Technical issues

The FZ-1's LCD display had a back-light that burned out quickly. When left unattended it could, in some cases, interrupt the power supply, causing the unit to switch off during operation, or not turn on at all (with an audible whine coming from the back-light). However, the back-lights were easily replaceable as they simply slid out from under the screen. Blue, non-Casio-manufactured back-lights are still available from various websites.

The floppy disk drive in the FZ-1 is also prone to failure. These were difficult to replace as the FZ-1 used a non-standard drive. The drive spun faster than normal IBM drives and it used the shugart bus rather than the PC/AT bus. Replacing the floppy-drive with a normal IBM drive required soldering inside the FZ-1 and rewiring of the ribbon cable so the ready signal of the drive was transmitted for normal operation. It also appears that only certain models of IBM standard floppy drive are compatible with the FZ-1. An FZ-1 with a broken floppy drive drops the price considerably.

However, it has been shown in some cases that the drives may not be burned out at all and all that is needed to render the Diskette drive useful again is to simply add lubricant to the internal cage assembly. The cage assembly is responsible for pushing the diskette downwards, therefore triggering the system's "Ready" signal to start data access. It is also responsible for allowing the motor assembly to latch onto the bottom of the diskette to start it spinning.

A further issue with the disk drives on the FZ series was that they would only accept HD (High Density) 3.5" floppy disks, at a time when this type of disk was considerably more expensive than the DD (Double Density) type. Workarounds for this failure include the removal from the drive of the small probe that detected the type of media inserted into the drive, but this again requires disassembly and modification of the drive's hardware itself.

Technical Specifications
Type: Digital
Synthesis: Additive, Sampling, Subtractive
Oscillators: 2
Waveforms: Pulse, Saw Up, Sine, Square, White Noise
Osc Modulation: Envelope, Keyboard, LFO, Oscillator, Glide / Portamento, Sync Hard
Oscillator Notes:
Harmonic Additive:
+ 48 harmonic levels
+ Waveform Drawing

Digital Subtractive:
+ Analog waves - Random, Saw Pulse, Double Sine, Pulse, Square and Sawtooth.
+ Digital waves - Sample cycles, user drawn.
Sampling: 16 bit, 9 kHz, 18 kHz, 36 kHz
Sampling Notes:
Sample Memory: 1 MB
+ 60 secs at 9 kHz
+ 30 secs at 18 kHz
+ 15 secs at 36 kHz

Sample Memory: 2MB Expansion
+ 120 secs at 9 kHz
+ 60 secs at 18 kHz
+ 30 secs at 36 kHz
Envelopes: 2
Evelope Paramerters: 8-step Casio
Filters: 1
Types: 12dB Slope (2-pole), Low Pass, Resonance
Filter Modulation: Envelope, Keyboard, LFO, Portamento
LFO: 1
LFO Parameters: Sample & Hold, Saw Down, Sine, Triangle, Delay, Key Sync
Polyphony & Tuning
Polyphony: 8
Timbrality: 8
Tuning: Standard
Modes: Mono, Polyphonic, Split
Patches RAM: 64
Storage: Tape, Internal
Case: Keyboard
Keyboard: 61 keys, Non-weighted, Plastic
Controls: Aftertouch, Mod - Wheel, Pitch -Wheel, Pedal - Sustain, Sliders, Velocity, Pedal - Volume
Display Type: LCD, LED, Backlit
Display Count H: 96
Display Count V: 64
Audio Output Connections: 1/4" Phone Jack, Mono Out, Stereo Main
Audio Output Notes: Stereo L/R, 1 - 8 Mono, Stereo TRS Headphones
Inputs: Mic
DAC Bits: 16
DAC Frequency Rate: 36
Power: 120 V AC
Year Released: 1987
Year Discontinued: 1991

Product Links
Company Product Sites:
[+] en.wikipedia.org
MSRP List Price: $2,200 - convert
Retail Street Price: $2,000 - convert
Used Price: $150 - $350 - convert

  Report Synthesizer
Sign in to follow this  

User Feedback

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.


  • Create New...