Jump to content
Sign in to follow this  

Miclop Ctrl x

   (0 reviews)
 -  1099 views


Description
Ctrl x is the perfect controller for all types of synthesizers and plugins, thanks to its workflow and to its big multi-touch screen, we can have all the values mapped as well as get access to any of them in just 2 clicks.

Feature

The synthesizer is a present we are going to give to all the Kickstarter sponsors who get the Ctrl x, to support us in this venture.

Oscillators

We have a polyphonic synthesizer with 2 oscillators based on samplers through the soundfont power. Classic waves, samplers from our favourite synthesizers or sampled instruments can be loaded on to it. Ctrl-x collects different types of synthesis such as FM and RM or one complete section to carry out waveshaper and other sections for synthesis by phase distortion. Both sections can be mixed with our oscillator sf2 or be used as single signal. It also counts on a unison engine with pitch independence to diffuse these voices through a different spectrum from the original signal. A sub-oscillator with classic waves and octave selection complete the oscillator.

Filters

Filters and more filters sum up this section. We offer you different types of filters: classic filter emulations, transistor ladders, diodes, state variables, comb… with more than 50 types of slopes. And all these come with a slight equalization and a soft distortion to give character to signal.

Modulation

The stuff gets serious here. The LFOs also work through soundfont; again, hundreds of waves available to modulate. Adds a slight entrance fade or uses some from the sequencers to shoot the tune and create innovative rhythms in an easy and quick way, without forgetting the available modulation envelopes.

Matrix

The Matrix is the en-routing brain. We´ve divided the modulation destinations into two areas: One to choose the section and another to choose the value, to avoid huge menus, the quick allocation is thus guaranteed.

Arpeggiators

We´ve placed two arpeggiators - one for each oscillator. With one we can keep building a base with a powerful bass and with the other a catchy tune. It is also then possible to use an arpeggiator for the two oscillators’ sound.

Effects

In the effects section we have delay, reverb, flanger... a wide range to have everything we want.

Hardware

All this handled with its specific controller, keeping the same control position for a perfect display of each value or section, improving the workflow, apart from visual aids such as the analyser or the scope which are always welcomed.

At Ctrl x we count on an integrated step sequencer to use either with hardware or with software. Its multi-touch screen gives us quick and intuitive edition. The encoders give us the precision for certain more sensitive aspects. Together they are the perfect team.

We consider template creation something which is always tiresome, that´s why we´ve made an effort to create them in the quickest possible way. We´ve created a software where you’ll be able to produce and personalize your own templates in a quick and simple way. To learn more about this, let´s take a look at the video.

If you like making a mess with stuff and you aren´t afraid of programming, Ctrl x is compatible with Arduino, which is why the possibilities are almost endless: Send some messages through the mackie control protocol to control your sequencer reproduction or stoppage, create your own arpeggiator or customize your machine.

Ctrl x is in its prototype phase at the moment, even if all its electronics and its programming is already in its final stage. The moulds are produced with a 3D printer, that is why the finishing touch is still really far from its final result. That is due to the fact that injection moulds have a very high cost, surpassing the €25,000. This is one of the reasons for the crowdfunding, another one is the importance of producing big quantities, as this cuts prices on components, materials and labour, allowing us to reduce the sales price.

After several years working on different prototypes related to music production, we created Ctrl Boy - a complete midi controller.
Images

Videos
Technical Specifications
Type: Digital
Synthesis: Frequency Modulation, Oscillator(s), Phase Distorion, Virtual Analog, Wave Shaping
Oscillators
Oscillators: 2
Envelopes
Envelopes: TBA
Filters
Filters: TBA
LFO
LFO: TBA
Polyphony & Tuning
Polyphony: TBA
Timbrality: 6
Arpeggiator
Yes TBA
Effects
Yes TBA
Case
Case: Desktop
Controls: Buttons, Knobs
Display Type: LED, TouchView
Display Notes: 7" mutli-touch screen
Connections
Audio Output Connections: 1/4" Phone Jack, Stereo Main
MIDI Ports: IN, OUT, USB
Production
Year Released: 2019

Product Links
Company Product Sites:
[+] www.kickstarter.com
Pricing
MSRP List Price: 299 Euros - convert
Shopping

  Report Synthesizer
Sign in to follow this  


User Feedback

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest

×
×
  • Create New...