Synthstrom Audible Deluge Portable Synthesizer Sampler Sequencer

   0 reviews  -  500 views
    Description
    Synthstrom Audible is a boutique electronics manufacturer from Wellington, New Zealand. They recently unveiled their new instrument the Deluge. An instrument 3 years in the making as an all in one stand-alone, portable synthesizer, sequencer and sampler designed for the creation, performance and improvisation of electronic music.

    The Deluge was created from the beginning to be original design independent of influences from hardware of the past or currently being manufactured.The unit offers a wide range of specifications.


    SYNTHESIZER

    Full-featured internal synthesizer engine (subtractive and FM).
    Polyphony limited only by CPU. Upto 48 unaffected synth voices or 64 unaffected sample voices may play.
    Live adjustment of synth and effect parameters with two endless-turn encoders with LED level-meters.
    Easy buttons to select the functions these control.
    Parameter automation recording.
    Arpeggiator
    Dedicated volume and tempo knobs.
    LFOs and envelopes on each synth / sample. Highly customizable modulation matrix.
    Synthesizer engine features LPF / HPF, FM, portamento, oscillator sync, ring modulation, unison detune, and more.
    Four basic waveforms, or select any WAV file from the SD card.
    FX including delay, reverb, chorus, flanger, phaser, bitcrushing, sidechain effect, live stutter, and more.
    Keyboard mode, where the pads become a live instrument on a 2D grid.
    Preset or custom scales, or chromatic mode.
    Live processing of the audio input.

    SEQUENCER

    Piano-roll-style sequencing on 128 full RGB pads (16×8) with scrolling and zooming.
    Sequencing limited only by device RAM (many thousands of notes).
    CC control and sequencing on all 16 MIDI channels
    Advanced syncing capabilities. Non-standard time signatures supported.
    Adjustable swing.
    Horizontal note shift.
    MIDI program change and bank change.

    SAMPLER

    Loads samples from SD card (up to 32GB SDHC).
    All samples are streamed from the SD card.
    Time-stretching
    5mm mic, ¼” line inputs and built-in microphone.
    Resampling
    Basic slicer

    CONNECTIVITY

    Two ¼” line outputs, and 3.5mm headphone output.
    2x CV outputs. 0 – 10V, individually configurable to between 0.01 and 2.00 volts per octave, or to hertz-per-volt.
    4x gate / trigger outputs individually configurable to v-trig or s-trig, with shared voltage switchable between 5V and 12V.
    Trigger clock output configurable, up to 192 PPQN.
    Trigger clock input, also with adjustable PPQN.
    MIDI input and output via hardware connectors or USB. Syncing via MIDI beat clock as master or slave.
    Simultaneously output separate sequences to all 16 MIDI channels, 2 CV / gate channels and 2 additional gate outputs, in addition to internal synthesizers / samples (limited only by CPU and RAM, as above).
    Powered via USB or 9 – 12V centre-negative (pedal-style) power supply (500mA) (not included).
    User-upgradeable firmware – expect updates from Synthstrom Audible.
    Internal speaker, rechargeable Li-ion battery (6+ hours of operation).
    Printed manual of software 1.3.0 is included.
    Images
    Architecture
    Type: Analog, Digital
    Synthesis: Frequency Modulation, Sampling, Subtractive
    Oscillators
    Oscillators: 2
    Waveforms: Pulse, Saw Up, Sine, Square, Triangle
    Osc Modulation: Keyboard, Knob, LFO, Sync Hard
    Sampling: 16 bit, 44.1 kHz
    Sampling Notes:
    Maximum of 12 minutes mono sample CD-quality samples at once
    Envelopes
    Envelopes: 2
    Evelope Paramerters: Attack, Decay, Sustain, Release
    Filters
    Filters: 1
    Types: High Pass, Low Pass, Resonance
    Filter Modulation: Sequencer
    LFO
    LFO: 2
    LFO Parameters: Saw Up, Sine, Square, Triangle
    Polyphony & Tuning
    Polyphony: 48
    Tuning: Standard
    Modes: Mono, Polyphonic
    Patches
    Patches RAM: 1
    Storage: SD Card
    Effects
    Distortion, chorus, flanger, delay, reverb, side chain
    Sequencer
    limited by Ram
    Case
    Case: Desktop
    Case Details: 128 full RGB pads 16×8 with scrolling and zooming
    Keyboard: Pads
    Controls: Buttons, Knobs, Modulation - Audio Input
    Dimensions (WxDxH): 12 x 8.2 x 1.8 inches
    Connections
    Audio Output Connections: 1/4" Phone Jack, 1/8" Phone Jack, Stereo Main, Stereo Headphone
    Audio Output Count: 3
    Inputs: 1 x 1/4"
    MIDI Ports: IN, OUT
    CV Ports: CV IN, CV OUT, Gate In, Gate Out, Trigger In
    Production
    Year Released: 2016
    Manuals & Documents

    Product Links
    Company Product Sites:
    [+] synthstrom.com

    Pricing
    Retail Price: US$899.00 – US$919.00 - convert

    Shopping
    YouTube Videos


User Feedback

Create an account or sign in to leave a review

You need to be a member in order to leave a review

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

There are no reviews to display.